Chinese English
 
 

Tel£º+86-760-88280020
         +86-760-88280303
         +86-760-88280100
Fax£º+86-760-88280019
Web£ºwww.blueguif.com
E-mail£ºblue@blueguif.com
Contact person: Pan Chenqing
Mobile: 13560622258
Address£ºNo.43 Electronic Base Factory,Science and Technology West Road,Torch development District, Zhongshan City,Guangdong, China 528437

 
Knitting in silicon tube and the outer braided silicone tube which burst pressure?
Adddate£º2019/1/11   Hits£º2200

Knitting in silicon tube and the outer braided silicone tube which burst pressure?

Reinforced silicone hose are many points, can be divided into internal braided silicone tube, silicone tube outside the middle braided, woven silicone tube, regarded the use of different materials are also different, in general, low pressure is usually woven fiber, high pressure are generally woven wire, the greater the number of layers, the greater the pressure. The so-called braided at present common hydraulic tube, namely the twine cloth, can enhance the pressure of pipeline, wear resistance, corrosion resistance etc.. The same number more, the greater the pressure, but for the hydraulic pipe, mainly rely on internal enhancement layer to resist outside pressure, twine cloth is not much effect. The common market for the majority of domestic hydraulic pipe wrapping cloth, because the technology is relatively backward, still use twine cloth layer by layer. Other common twine cloth tube and application in the field of silicone tube steam steam, as is safety.

So there is no relationship between the burst pressure and the internal and external said, to see the manufacturers instructions. Typically, burst pressure of pipelines at home is about 2 times the working pressure, of course, does not exclude the part can reach 3-4 times. Abroad should be in about 4 times. If it is used in high voltage field, this respect must pay attention to.


Copyright£º@2019   Guangdong Blue silicon-fluoride pipe company limited( co., LTD. )